Your policy, your selection.
Your policy is between you and your insurer. Selecting the licensed restoration contractor generally sits with the property owner.

Soda Blasting Soot Cleanup · IICRC S700 · Board-Up & Contents Direct Insurance Billing · 60-Minute Response
Eco-Friendly Solutions For Healthier Spaces
Reviewed by Marvin Riveira·Licensed & Insured In CT·Owner-Operated
Fire damage restoration is the ANSI/IICRC S700 documented process of stabilizing a fire-damaged building, classifying the smoke residue, and cleaning it off every affected surface, the contents, and the HVAC system. Residue type decides method. Dry smoke, wet smoke, protein and fuel oil each clean differently, and soot is acidic, so it keeps corroding metal, electronics and finishes until it is removed. Cleaning is followed by source deodorization, HEPA filtration, and verification that the odor is gone rather than covered.
In Norwalk, CT, the order is fixed. The fire department releases the scene, then the building is secured and boarded. Water from the suppression effort is extracted and dried first, because soot pressed into wet material sets, and wet cellulose grows mold within days. Residue is typed, then structure and contents are cleaned separately, contents off site where needed. Deodorization runs last, at the source, with the assembly open. Every stage is documented for the carrier.
Connecticut fire work is scoped against ANSI/IICRC S700. The local fire marshal holds the scene until the cause and origin investigation releases it. The cleaning phase is restoration work; the structural repair that follows is home improvement work under Connecticut law, which requires a registered contractor, a written contract, and a permit from the local building department.
Green Restoration works to ANSI/IICRC S700: stabilize first, type the residue before choosing a cleaning method, run HEPA filtration throughout, and treat odor at the source. Ozone deodorization runs only in an empty structure, because no federal agency has approved ozone generators for use in occupied space.
Norwalk fire losses split between SoNo brick lofts and condos, harborside homes, and the postwar ranches and split-levels inland. Whatever burned, one certified crew owns the arc: same-hour board-up, extraction, soda blasting, pack-out, and rebuild under a single owner-signed S700 scope.
Norwalk dispatch reaches SoNo, the harbor, and the inland ranches inside the hour, with board-up, extraction, and generator power on the first truck.
IICRC S700 · 60 minute dispatch · Stamford
Sodium bicarbonate abrasive blasting strips fire char from joists, sheathing, and masonry chimneys without damaging the substrate underneath. Mohs 2.5 media is softer than wood, FDA GRAS, silica-free, and water-soluble for HEPA-vac cleanup that wire brushing and sanding cannot match.
Sodium bicarbonate · Mohs 2.5 · IICRC S700 aligned
Smoke damage in Norwalk requires HVAC decontamination, negative-air containment, and HEPA scrubbing on every affected zone. We coordinate with property managers, condo boards, and adjusters so containment, scope, and access stay aligned across the entire affected footprint.
HVAC decon · Negative-air containment

Same-day plywood board-up of broken windows and doors plus roof tarp-over to secure your Norwalk property against weather, animals, and theft while the IICRC S700 restoration scope is finalized.
Whole-home and commercial generators staged on every Norwalk fire response when utility power is cut at the meter. We run dehumidifiers, HEPA scrubbers, hydroxyl generators, and temporary lighting off our own diesel and propane gensets so drying, containment, and crew safety continue around the clock without waiting on Eversource to re-energize the service.
Full IICRC S700 puff back remediation for Norwalk homes with oil-fired heat. Mechanical room cleanup, NADCA-aligned supply duct rotary brushing, soft-goods laundering, hydroxyl deodorization through every upstairs bedroom, and coordination with licensed CT oil burner technicians so the furnace returns to safe operation before close-out.
Creosote-bonded soot blowback from clogged chimneys, downdrafts, and flue fires cleaned with soda blasting on the masonry, full firebox and damper service, and HVAC riser decontamination where the flue shares a chase with supply ducts. We coordinate with a licensed CT chimney sweep on flue liner inspection before reuse.
Grease fire cleanup for Norwalk kitchens including cabinet refinishing, appliance cleaning, soda blasting on charred framing behind drywall, and full structural restoration.
Inventoried, barcoded contents pack-out to our secure climate-controlled storage facility for off-site ultrasonic cleaning, ozone deodorization, and soft-goods laundering. Your Norwalk belongings stay in humidity-controlled storage, documented for your insurer, until reconstruction is complete and we pack them back.
IICRC S500 structural drying for fire suppression water. LGR commercial dehumidifiers, moisture mapping, and EPA-registered antimicrobial treatment within the 48-hour mold-prevention window so the fire loss does not become a mold loss on top of it.
Thermal fogging, ozone chamber treatment, and hydroxyl generators neutralize smoke odor at the molecular level throughout the structure. The pH-neutralizing chemistry of our soda blast media also breaks down acidic soot odor compounds at the source, not just behind a fragrance mask.
Single-source reconstruction once mitigation is signed off. Licensed CT contractors handle framing, drywall, electrical re-feed off our gensets, plumbing, hardwood refinishing, and finish carpentry through the Norwalk building department permit process. One restoration partner from board-up and generator power through reconstruction handoff means no scope gaps between trades and one closeout file for your carrier.
Norwalk Fire Damage Does Not Wait For Morning. 60 Minute Response.
A certified crew reaches Norwalk inside the hour and stays on the job through the rebuild.
Owner-led fire damage response with 60-minute Stamford dispatch, soda blasting soot removal, IICRC S700 protocol, and direct insurance billing across Norwalk and Fairfield County.
Sodium bicarbonate char removal on structural framing, joists, sheathing, and masonry chimneys. The only Fairfield County crew running soda blasting in-house for fire damage.
IICRC S700 certified crews arrive within 45 to 60 minutes from Stamford with board-up materials, roof tarps, HEPA air scrubbers, blast pots, and water extraction equipment.
Negative-air containment, HVAC riser decontamination, and HEPA scrubbing on adjacent rooms for Norwalk smoke jobs, with generator-powered drying when Eversource cuts the meter.
We bill State Farm, Liberty Mutual, Travelers, Chubb, AIG, and every major carrier directly with IICRC documentation, soda blasting protocol records, and contents inventory.
These are the fire and smoke losses we restore most often, every job run to the IICRC S700 standard with documented cleaning, source odor control, and a record built for your insurer.

In Norwalk, a stovetop grease fire in a South Norwalk mill-village multi-family scorches cabinets and leaves greasy soot across the kitchen.
Most home fires start in the kitchen, where a grease or stovetop flare can scorch cabinets, melt fixtures, and drive greasy soot across the ceiling and into adjoining rooms. The residue is acidic, so it keeps etching metal, stone, and finishes for as long as it sits.
Our IICRC S700 crews stabilize the scene, remove unsalvageable material, and clean structural surfaces with the right method for each soot type, dry sponge, solvent, or abrasive, before sealing odor-bearing surfaces. Contents are inventoried and either cleaned on site or packed out for off-site restoration.
Surfaces are cleaned to a documented standard and deodorized so the kitchen does not carry a lingering burnt odor. Every line of scope, photo, and cleaning record is documented for your insurer so the claim moves on evidence.
Scenario 1 of 4: Kitchen Fire Damage
The same local Green Restoration team covers all of these across Norwalk. One number for every emergency and every cleanup.
Common range across single-room smoke remediation through whole-home fire reconstruction. Final pricing depends on inspection.
Four quick questions. Starting figures on this page. No call required.
FLIR thermal scope. Free, no obligation. Owner-led on every fire job.
Ranges shown are starting figures only. Final pricing depends on on-site inspection and carrier coverage. We are not licensed public adjusters.
A Norwalk fire has two clocks running: the 72-hour soot clock that etches finishes and fixtures, and the coastal humidity that keeps suppression water active in walls longer than inland owners expect. Both clocks are beaten by starting S700 response before the adjuster is even assigned.
Acidic Residue Attacks Stone And Metal Fast
Acidic soot etches glass, marble, brass, and stainless inside 72 hours, and coastal humidity activates the acids faster. In a loft the exposed brick and metalwork are the value; in a ranch it is the kitchen. Either way the etching does not pause for the adjuster.
Hidden Spread Beyond The Fire Room
A single-room fire in a West Norwalk or Rowayton property pushes smoke through wall cavities, return-air plenums, and shared HVAC trunks within minutes. Without negative-air containment and HEPA scrubbing, adjacent rooms are contaminated by soot the original fire never reached.
Pre-War Stock Runs Oil Burners
Plenty of Norwalk homes still burn oil, and one failed ignition can film the whole house through the supply runs. The fix is a complete S700 scope, mechanical room, ductwork, and living spaces together, before the residue cures onto finishes.
Mold Colonizes In 48 Hours Unsealed
Suppression water disappears into walls, subfloors, and insulation, and Norwalk's coastal humidity keeps it there. The 48-hour S500 drying window is the whole game: hold it and the loss stays a fire loss; miss it and mold writes the second half of the claim.
Flue Downdraft Or Liner Failure
A clogged flue or liner failure sends a chimney puff back through the firebox and adjacent rooms. Creosote-bonded soot etches brick, fieldstone, and stone hearths within days. Without soda blasting on the masonry and a licensed CT sweep liner inspection, the next fire risks restart inside the chase wall, common in older Norwalk stock.
Eversource Service Cut At The Meter
Norwalk Fire Department often pulls the meter on a structural fire, and Eversource re-energization runs days to weeks. Without site generators running dehumidifiers, HEPA scrubbers, and hydroxyl machines, drying and odor work stalls. Our trucks roll with diesel and propane gensets so work continues.

Norwalk mix of 1900s mill-village multi-family near South Norwalk and pre-war Colonials in West Norwalk creates fire patterns that DIY cleanup and surface-only methods cannot solve. IICRC S700 response with in-house soda blasting is the durable fix.

Green Restoration runs Econoline blast pots, sodium bicarbonate media, and trained operators in-house, the only Fairfield County restoration company with soda blasting capability on the truck for fire jobs. Norwalk framing, joists, and masonry chimneys are all candidates for source-removal char cleanup that wire brushing cannot match.
A crew is on site in Norwalk within 45 to 60 minutes of your call, day or night, dispatched from Stamford. Same-visit board-up, tarp-over, and fire suppression water extraction begin immediately so the loss stops compounding while your adjuster is still being assigned.
Fires in Norwalk need negative-air containment, HEPA scrubbing, and generator-powered drying when Eversource cuts the meter. We pre-stage diesel and propane gensets, HEPA scrubbers, hydroxyl machines, and Econoline blast pots for every Norwalk response.
We bill State Farm, Liberty Mutual, Travelers, Chubb, AIG, Safeco, and every other major carrier directly with IICRC documentation, timestamped photos, soda blasting protocol records, and contents inventory so your Norwalk claim closes fast.
Soda blasting is the difference between a fire-cleaned Norwalk property that stays clean and a property that smells like smoke six months later. Norwalk mix of 1900s mill-village multi-family near South Norwalk and pre-war Colonials in West Norwalk absorbs fire soot into the substrate itself, where sanding and wire brushing cannot reach without driving carbon deeper. Our IICRC S700 crews run sodium bicarbonate abrasive blasting in-house on every fire job that needs source removal on structural surfaces.
Pharmaceutical-grade baking soda. Softer than wood (Mohs 4) and original lath, harder than soot bond layer. Friable on impact, shatters into dust on contact with the substrate rather than embedding into grain or finish.
IICRC S700 fire protocol and S520 mold protocol both list abrasive blasting as a recognized source-removal method for porous structural wood, charred framing, joists, and sheathing where wire brushing leaves residue.
Same compound used in food and pharmaceuticals. No crystalline silica, no toxic residue, no respirable lung hazard beyond standard PPE. Non-sparking and non-flammable on partially-cleared fire scenes.
Brick-and-timber loft conversions are the Norwalk case for soda: exposed beams and brick are the finish, so grinding char off them destroys the thing the owner is paying to keep. Bicarbonate is softer than both, lifts the char as water-soluble dust, keeps the patina, and chemically neutralizes the soot odor. On conventional framing it works the same, minus the sentiment.
On Norwalk fire jobs we typically deploy soda blasting on three substrates: charred dimensional framing and ceiling joists where the fire reached structural wood, brick or stone masonry chimneys with creosote-bonded soot, and sheathing behind blown-out drywall where a stain-blocking primer alone will not contain odor. Plaster walls and finish surfaces get IICRC S700 dry-sponge cleaning first, then a test patch decides whether selective soda blasting or full repaint is the right call.
Sodium bicarbonate residue is water-soluble and FDA GRAS, so post-blast cleanup is HEPA vacuuming followed by a damp wipe with a microfiber towel, then a final pass with EPA-registered antimicrobial under IICRC AMRT protocol to address any mold spores exposed by the char removal. We document moisture content on cleaned framing back to under 16 percent before any new sheathing or drywall goes up. In Norwalk, that 16 percent moisture gate is the line between a clean rebuild and a callback.

Norwalk calls range from SoNo loft smoke to a split-level kitchen flare, and the fleet does not pick favorites: blast pots, HEPA scrubbers, contents crates, and negative-air machines ride together so staging is decided on arrival, not back at the shop.
Every Norwalk response truck is staged with the full IICRC S700 fire kit, soda blasting setup, contents pack-out crates, and structural drying equipment so a single dispatch handles board-up through reconstruction handoff.

On a Norwalk dispatch our branded fleet deploys from Stamford within 45 to 60 minutes to any neighborhood from South Norwalk to Brookside. We pre-stage soda blast pots and HEPA scrubbers for structural fires, contents crates for smoke-only jobs, and negative-air machines for containment. The crew evaluates on arrival and stages only what the scene requires.
Norwalk fire patterns differ by neighborhood: puff back in pre-war West Norwalk Colonials with oil heat, kitchen fires in South Norwalk multi-family conversions, and marina warehouse fires near Norwalk Harbor. The fleet handles all of them with one IICRC S700 protocol; only the staging order on arrival changes.
From the first call to final walkthrough, every step is documented, insured, and owner-supervised.

Full service fire damage response, soda blasting soot cleanup, contents pack-out, and reconstruction for Norwalk homes and businesses. 60-minute emergency dispatch across Fairfield County, day or night.
Green Restoration provides IICRC S700 certified fire damage restoration and soda blasting soot removal in Norwalk, CT, serving neighborhoods including South Norwalk, East Norwalk, West Norwalk, Rowayton, Cranbury, Silvermine, and Wolfpit. From Stamford with direct access via I-95 and the Merritt Parkway, our certified technicians are on site within 45 to 60 minutes of dispatch with board-up, tarp-over, soda blast pots, and contents protection.
As a Fairfield County company based in Stamford, we know the fire conditions Norwalk properties face along the Long Island Sound waterfront + Norwalk River corridor: puff back in pre-war West Norwalk Colonials with oil heat, kitchen fires in South Norwalk multi-family conversions, marina warehouse fires near Norwalk Harbor. Our crews coordinate directly with adjusters from State Farm, Travelers, Liberty Mutual, Chubb, and all other major carriers.
We are not licensed public adjusters and do not negotiate claims on your behalf. We submit IICRC S700 scope documentation directly to your insurer.
60-minute emergency dispatch, 24/7/365.
(203) 674-9573Request Free InspectionIICRC S700 · Licensed & Insured · All Insurance Accepted
All Fairfield County towns served from Stamford.
Crews dispatched from Stamford within 45 to 60 minutes across Norwalk and Fairfield County. Board-up, soda blasting source removal, contents pack-out, and reconstruction managed end to end from minute one.
Crews on site within 45 to 60 minutes from Stamford with board-up, HEPA scrubbers, blast pots, and generator power.
Every fire job follows IICRC S700 with soda blasting on structural char, HEPA scrubbing, and hydroxyl odor treatment.
We file scope documentation and itemized estimates directly with major carriers. Not licensed public adjusters.
Econoline blast pots and sodium bicarbonate media run by trained operators on every fire job that needs source removal.


Your Norwalk Fire & Smoke Damage Specialists Since 2014
Green Restoration provides IICRC S700 certified fire and smoke damage restoration, soda blasting soot cleanup, contents pack-out, and reconstruction for homes and businesses in Norwalk, CT. Our process focuses on rapid stabilization, hospital-grade soot removal, molecular odor treatment, and documented reconstruction. We work with property owners and insurance providers to document scope clearly and restore affected areas the right way, without unnecessary steps or delays.
“As the local co-owner in Fairfield County, I lead a team with 35+ combined years of restoration experience and the full support of the Green Restoration network to every Norwalk property we serve. Every fire emergency is personally overseen, documented for your insurer, and stays open through soda blasting clean-up and reconstruction until lab-verified clearance confirms the work is complete.”
Connecticut policyholders generally have the ability to select their own licensed restoration contractor. Carriers and contractors work the same claim process together.
Your policy is between you and your insurer. Selecting the licensed restoration contractor generally sits with the property owner.
Carrier referral and preferred-vendor programs are offered to streamline claims. You can use a referred contractor or retain a different licensed contractor.
Referred or independent, we submit IICRC S700 documentation, photo-logged inventory, and itemized line items directly to your adjuster.
If you bring in a different licensed contractor mid-project, the scope and remaining work are documented at handoff so the claim continues without gaps.
Educational reference only. We are not licensed public adjusters and do not negotiate claims on your behalf. Coverage and process specifics live with your carrier and your policy language.
4.9 out of 5, Rated by your neighbors on Google
We discovered mold when removing our pellet stove and called Green Restoration for help. David was very communicative and helpful throughout the entire process. He did the job thoroughly and professionally. Highly recommended!
David Woolner
Mold RemediationI had a fantastic experience with Green Restoration. From start to finish, the team was professional, thorough, and extremely knowledgeable. David came for the initial inspection and took the time to explain the entire process.
Annmarie Gieparda
Mold RemediationWe had mold due to a water leak in our half finished basement. David and his crew did a great job, we were very satisfied. I would highly recommend Green Restoration to anyone.
Tanya
Water DamageI needed my entire condo completely cleaned after a soot blow back. Green Restoration was top shelf! So thorough and professional. Thank you so much!
Jacki Hornish
Fire & Soot CleanupInstant estimate for emergency response, soda blasting soot cleanup, contents pack-out, and reconstruction in Norwalk and Fairfield County. Transparent pricing, direct insurance billing.
Ranges based on IICRC S700 fire jobs we have handled across Fairfield County, drawn from 136 verified Google reviews (4.9★) and our internal job-cost ledger. Final pricing depends on on-site inspection.
Smoke, Soot & Puffback
$1,500 to $8,500
Furnace puffback, chimney smoke, soot or nicotine odor cleanup, no structural burn
Contained Fire + Smoke
$8,500 to $45,000
Single-area burn with house-wide smoke, soot and suppression water cleanup
Major Structural
$45,000 to $150,000+
Multi-room structural loss with demolition, odor sealing and full reconstruction
Priced by scope: what burned, and how far the smoke traveled. Read the full cost guide.
Clear, honest answers about emergency fire response, soda blasting, smoke cleanup, and insurance coverage in Norwalk, CT.
Smoke, soot, and puffback cleanup with no structural burn typically runs $1,500 to $8,500, and it is the most common fire-family job we handle in Norwalk. A contained fire with house-wide smoke damage runs $8,500 to $45,000, and major structural restoration with reconstruction runs $45,000 to $150,000 and up. Smoke travel, soot type, and suppression water place a loss inside its tier. Assessment is free and produces a written line-item scope we submit directly to your insurer. We are not licensed public adjusters and do not negotiate claims on your behalf.
Our IICRC S700 certified fire crews dispatch from Stamford and typically reach most Norwalk neighborhoods within 45 to 60 minutes, day or night. We coordinate with property managers and HOA where applicable so containment, board-up, and HEPA scrubbing start the moment we step on site. Call (203) 674-9573 any time.
In a SoNo loft the exposed beam and brick ARE the finish, and that rules out anything harder than the substrate. Bicarbonate shatters on contact, carries the char off as water-soluble dust, keeps the patina the owner paid for, and chemically kills the soot odor rather than trapping it under sealer. On conventional Norwalk framing it does the same job without the drama.
Norwalk pricing brackets the housing: about $3,500 for a contained single-room smoke loss in a ranch or split-level, up to $80,000 and beyond for loft or whole-home losses with structural soda blasting, HVAC decontamination, pack-out, and rebuild. Every number comes from an on-site S700 scope built on thermal imaging and soot density mapping, with the owner attending anything over $25,000.
Connecticut homeowner policies cover fire damage at replacement cost in Norwalk. We submit IICRC S700 documentation, soda blasting protocol records, and contents inventory directly to your carrier. We are not licensed public adjusters and do not negotiate claims on your behalf, but we provide the scope documentation your adjuster requires.
A contained kitchen fire in a Norwalk ranch wraps in 5 to 10 days. Loft losses where smoke loaded brick and open ceilings run 10 to 21 days. Whole-home restoration with structural blasting, rebuild, and Norwalk building department permits spans 30 to 90 days depending on scope.
Yes. Furnace puff back in Norwalk means mechanical room decontamination, NADCA-aligned duct cleaning, soft-goods laundering upstairs, hydroxyl deodorization, and a licensed CT oil burner technician clearing the unit before reuse. Chimney puff back means soda blasting the masonry, firebox and damper service, and a licensed sweep inspecting the liner, plus riser decontamination where flue and ducts share a chase. Both close under S700 documentation.
Meter pulls are routine on Norwalk structural fires and Eversource re-energization takes what it takes. We bring the power: gensets on the truck run dehumidifiers, scrubbers, hydroxyl machines, and site lighting continuously, which is what keeps the drying clock under 48 hours and the fire loss from growing a mold rider.
Do not re-enter the structure until Norwalk Fire Department clears it for re-entry. Once cleared, do not touch soot-covered surfaces, do not turn on the HVAC system, and do not plug in electronics exposed to smoke or suppression water. Photograph visible damage from the exterior for your insurance file and wait for the IICRC S700 crew to arrive with PPE, HEPA scrubbers, soda blasting equipment, and scope documentation.
Norwalk owners pick us for the range: the same certified crew handles a SoNo loft where the finishes are the point and a split-level kitchen fire where speed is. A licensed and insured owner on every scope under IICRC Certified Firm #70236106, in-house soda blasting, complete carrier files, and 24/7 dispatch at (203) 674-9573.
Yes. Norwalk contents are barcoded, photographed, packed out, and held in climate-controlled storage while the property is restored, with loft furnishings and coastal-home pieces cleaned and deodorized off-site. Fully documented for the carrier, packed back after the rebuild. Call (203) 674-9573.