Post-Construction Cleanup CT · NY · MA
Dust, Debris, Paint Splatter, Final Detail Cleaning. Commercial And Residential · COI On Request · Trade-Ready Handoff
IICRC Certified
Owner On Every Job
Eco-Friendly Solutions For Healthier Spaces
Reviewed by Green Restoration's IICRC-Certified Team · Licensed & Insured · IICRC Certified Firm
Complete Post-Construction Detail And Turnover
From rough-clean dust sweep through detail cleaning, HVAC debris removal, tile haze, window polish, and trade-ready punch-list handoff, every commercial build-out and residential renovation cleanup handled across Connecticut, New York, and Massachusetts.
Residential Renovation Cleanup
Kitchen, bath, basement, addition, and whole-home renovation turnover. Rough-clean dust sweep through final detail so the homeowner walks into a move-in-ready finish. Tight coordination with the GC schedule.
GC coordinated · Move-in ready
Commercial Build-Out Cleanup
Office, retail, medical, restaurant, and multifamily build-out turnover. 3-phase scope aligned with the project manager's schedule. COI on request, after-hours windows standard, CO walkthrough documented.
COI on request · After-hours crews
Dust And Drywall Residue Removal
Fine gypsum dust settles on every horizontal and vertical surface during drywall work. HEPA-vacuumed, wiped, and HVAC-protected cleaning prevents dust from re-airborning during punch list and occupancy.
HEPA · Horizontal and vertical
Additional Post-Construction Services
Paint And Adhesive Splatter
Paint drips, adhesive residue, caulk, silicone, and overspray removed from finished flooring, glass, metal, and fixtures. Scrape and chemistry matched to the substrate so finishes are not scratched during cleanup.
HVAC Duct Construction Debris Cleaning
Drywall dust, sawdust, and construction debris that entered the HVAC system during the build are vacuumed per NADCA standard. Filters replaced, coils inspected, and the system verified before certificate of occupancy.
Window And Glazing Final Polish
Interior and exterior glass, frames, and sills cleaned of construction residue, sticker adhesive, and overspray. Final polish pass before the building owner, tenant, or retail merchandiser walks the space.
Tile Grout Haze And Cement Cleanup
Grout haze, thinset residue, and cement splatter removed from ceramic, stone, and porcelain tile with substrate-safe chemistry. Sealed floors receive a protective seal coat before turnover.
Deep Floor Polish And Seal
Hardwood, tile, LVT, polished concrete, and stone floors deep-cleaned and either sealed, waxed, or polished per spec. Final floor finish delivered to the handoff standard in the construction documents.
Punch-List Final Walkthrough
Walk the space with the GC or PM, document punch items, correct on the spot where scope allows, and sign off in writing. CO paperwork, final photos, and the cleanup completion certificate delivered same day.
Ready For Turnover? Dust Alone Will Fail The Walk. 3-Phase Cleaning Ready For CO.
3-Phase Rough-Detail-Final Post-Construction Cleanup For Commercial Build-Outs And Residential Renovations Across Connecticut, New York, And Massachusetts. COI On Request. Trade-Ready Handoff.
Why Construction Dust Fails Every Pre-CO Walk
Construction dust is not dirt. It is fine gypsum, cementitious, and silica particulate that settles on every surface in the space and inside the HVAC system. A single rough-clean pass with brooms and shop vacs leaves the dust airborne again the moment people walk in. 3-phase professional cleanup is the difference between passing turnover and getting kicked back to the GC.
Drywall Dust Is Fine Enough To Hang
Particulate Stays Airborne
Gypsum dust is small enough to stay suspended in still air for hours. A shop-vac sweep pulls the heavy debris, not the fine particulate that later settles on finishes, HVAC returns, and light fixtures. HEPA-vacuum and wipe-down is the only finish that holds.
HVAC Distributes Dust House-Wide
Ducts, Coils, Returns
Running HVAC during or after construction without proper protection pulls dust into ducts and coils. The system then redistributes the dust every time it runs. NADCA-standard cleaning before certificate of occupancy prevents the complaint call two weeks later.
Paint And Adhesive Require Chemistry
Not Scraping
Paint drips, adhesive residue, silicone, and caulk are bonded to finished substrates. Scraping with wrong chemistry scratches the finish, paint drips on hardwood, adhesive on stainless, silicone on glass. Matched chemistry and technique is how clean crews leave the finish intact.
Silica Exposure Is A Safety Issue
OSHA Respiratory Standard
Concrete and tile cutting produce silica dust governed by OSHA's respirable crystalline silica standard. Professional cleanup uses PPE and HEPA equipment appropriate to the exposure. Untrained cleaning crews create a liability exposure that lands on the GC or the building owner.
Turnover Deadline Drives Everything
CO, Lease Commencement, Move-In
A missed cleanup day pushes the CO, the lease commencement date, or the homeowner's move-in. Cleanup scope has to be scoped, scheduled, and manned to the GC's date. Soft-booking a cleanup and missing a turnover is an expensive outcome for everyone.
Trade-Ready Handoff Is Documented
Punch List, COI, Paperwork
Commercial turnover carries a paperwork requirement: COI, punch-list, completion certificate, and occasionally sustainability credits. A clean-only crew without that paperwork flow slows CO issuance. Professional post-construction cleanup closes with the paperwork ready, not as a follow-up.
Why Choose Us In The Tri State
Owner-led service with 60-minute response, direct insurance billing, and eco-friendly methods across The Tri State.
GC Partner Friendly
Active partner network with general contractors across the tri-state. Dates booked with the PM, schedule adjusted when the project moves, and crew sized to the turnover date.
COI On Request
Certificate of insurance naming the project owner, GC, and additional insureds issued pre-job. Coverage includes general liability, auto, workers comp, and pollution liability.
3-Phase Cleaning Protocol
Rough clean after framing and drywall, detail clean after paint and finishes, final walk before CO. Each phase booked separately so the space is clean at every inspection.
CO-Ready Handoff
Punch-list closeout, completion certificate, before and after photos, and COI packaged for the GC or building owner. Ready for CO inspection, not a follow-up call the next day.
Post-Construction Cleanup Coverage Across CT, NY & Western MA
Ten service areas staged across the tri-state with same-week scheduling and 3-phase turnover cleanup dispatched to the GC from the nearest location.
Turnover Date Coming Up?
Same-week scheduling across the tri-state. COI issued pre-job, crew sized to the turnover date, CO-ready paperwork closing the project.
(833) 800-0474Request Free InspectionIICRC S520 Certified · Licensed & Insured · All Insurance Accepted
Covered by crews from the nearest office, plus dedicated commercial response teams staged in NYC, Long Island, Hartford, and Litchfield County for faster dispatch on tight turnover dates. COI on request, GC partner network.
Find Your Local Post-Construction Cleanup Team
3-Phase Rough-Detail-Final Post-Construction Cleanup For Commercial Build-Outs And Residential Renovations Across Connecticut, New York, And Western Massachusetts. COI On Request. GC Partner Network.
Need Immediate Assistance?
Call Now to Speak Directly With a Local Owner. Emergency Response Available 24/7.
(833) 800-0474Our Post-Construction Cleanup Process
From the first call to final walkthrough, every step is documented, insured, and owner-supervised.
Trusted Across CT, NY & MA Since 2014
IICRC-certified firm serving CT, NY, and Western Mass. Same owner-operated quality on every job, whether it's a single-room cleanup or a total-loss rebuild.
Certified Restoration Specialists Since 2014
One Team, One Standard Of Care, Across The Tri-State
Green Restoration is a certified restoration firm serving homes and businesses across Connecticut, Westchester County, NYC, Long Island, Rockland, Putnam, and Western Massachusetts. Our IICRC-certified technicians respond 24/7 with commercial-grade extraction, structural drying, mold containment, and fire damage equipment.
We work with property owners and insurance providers to document damage clearly, define scope honestly, and restore affected areas the right way, without unnecessary steps or delays. Eco-friendly, biodegradable products on every job. Direct insurance billing with all major carriers.
Every crew is owner-operated and radio-dispatched from our regional hubs, so a technician is on site within the hour on emergency calls. We carry full general liability and workers compensation coverage in all three states, and every job finishes with written IICRC clearance documentation ready for your adjuster.
Trusted by Families in Connecticut & New York &
Massachusetts
4.9 out of 5, Rated by your neighbors on Google
Office build-out in Stamford came together on a tight lease date. Three phases aligned with our trades. CO walk went first-pass and the tenant moved in on schedule.
GC Partner
Commercial Build-OutWhole-home renovation punch and turnover. The HVAC got a NADCA clean, the hardwood got resealed, and the owner walked the house without a single dust complaint.
Homeowner
Renovation TurnoverRestaurant build-out. COI issued the day after the contract was signed. Floors polished, grout hazed cleaned, and open date held.
GC Partner
Restaurant Build-OutMedical suite required a specific clearance standard. Three phases, HEPA on every pass, final walk signed off by the landlord's PM. CO cleared first pass.
GC Partner
Medical Build-OutHow Much Does Post-Construction Cleanup Cost?
Instant estimate for commercial build-out and residential renovation cleanup across Connecticut, New York, and Massachusetts. 3-phase rough-detail-final pricing, COI on request, written fixed quotes before crews mobilize.
Post-Construction Cleanup FAQs
Clear answers on rough vs detail vs final, HVAC scope, paint and tile protocol, GC partner handoff, and CO paperwork for post-construction cleanup across Connecticut, New York, and Massachusetts.
All three, scheduled separately against the GC timeline. Rough clean follows framing and drywall. Detail clean follows paint and finishes. Final clean is before the CO walk or owner walkthrough. Each phase addresses the mess of the trades that just finished and prepares the space for the trades that come next.
Yes, post-construction HVAC cleaning to the NADCA standard is standard scope on our commercial turnover. Fine drywall dust and construction debris pulled into ducts during the build are vacuumed, filters replaced, and coils inspected so the system runs clean before the certificate of occupancy.
Paint and adhesive removal is matched to the substrate. Finished hardwood uses specific solvents and a plastic scraper. Tile and polished concrete use substrate-safe chemistry. Stainless and glass use different chemistry again. Wrong tool and chemistry scratches the finish. Our crews carry the right tool for each substrate.
Grout haze is removed with either a grout haze chemistry or a light acid-based cleaner depending on the tile material. Porous tile and stone require substrate-safe chemistry, never acid. Final phase seals or waxes per the finish schedule so the haze removal does not open the floor to future staining.
Yes. Commercial is priced per square foot with a COI, after-hours crew, and punch-list closeout built in. Residential is priced per project scope with GC coordination and a move-in-ready walkthrough at the end. Every quote is fixed in writing before crews mobilize.
Managing a commercial property? See our Commercial Commercial Cleaning service for businesses and facility managers.
For Business