01RIGHT
Your policy, your selection.
Your policy is between you and your insurer. Selecting the licensed restoration contractor generally sits with the property owner.
Guilford, CT Fire & Smoke Damage Restoration
Historic Green Colonial & Saltbox Fire Cleanup · Soda Blasting IICRC S700 · Direct Insurance Billing · 60-Minute Response
IICRC CertifiedOwner-Led Estimates
Eco-Friendly Solutions For Healthier Spaces
Reviewed by David Megeneishvili·Licensed & Insured In CT·IICRC AMRT + WRT
4.8★Google Rating12 verified reviews
60 minEmergency ResponseAcross New Haven County
5,000+Properties RestoredAcross CT, NY & MA
15+Years ExperienceIICRC S700 Certified
The Fire and Smoke Standard
What Is IICRC S700 Fire Damage Restoration?
Fire damage restoration is the ANSI/IICRC S700 documented process of stabilizing a fire-damaged building, classifying the smoke residue, and cleaning it off every affected surface, the contents, and the HVAC system. Residue type decides method. Dry smoke, wet smoke, protein and fuel oil each clean differently, and soot is acidic, so it keeps corroding metal, electronics and finishes until it is removed. Cleaning is followed by source deodorization, HEPA filtration, and verification that the odor is gone rather than covered.
In Guilford, CT, the order is fixed. The fire department releases the scene, then the building is secured and boarded. Water from the suppression effort is extracted and dried first, because soot pressed into wet material sets, and wet cellulose grows mold within days. Residue is typed, then structure and contents are cleaned separately, contents off site where needed. Deodorization runs last, at the source, with the assembly open. Every stage is documented for the carrier.
- ANSI/IICRC S700 aligned
- Residue typed before cleaning
- HEPA filtration throughout
- Odor treated at the source
State Compliance
Why Guilford Fire Jobs Run IICRC S700
Connecticut fire work is scoped against ANSI/IICRC S700. The local fire marshal holds the scene until the cause and origin investigation releases it. The cleaning phase is restoration work; the structural repair that follows is home improvement work under Connecticut law, which requires a registered contractor, a written contract, and a permit from the local building department.
Green Restoration works to ANSI/IICRC S700: stabilize first, type the residue before choosing a cleaning method, run HEPA filtration throughout, and treat odor at the source. Ozone deodorization runs only in an empty structure, because no federal agency has approved ozone generators for use in occupied space.
Fire Damage Restoration Services
Complete Fire And Smoke Damage Restoration In Guilford, CT
Guilford holds some of the oldest housing stock in Connecticut, and post-and-beam colonials around the Green burn differently than modern platform framing: fire travels the open bays and chimney chases. Our crews stabilize, soda blast the char without grinding historic timber, pack out contents, and rebuild, all under one IICRC AMRT/WRT owner-signed scope.
24/7 Emergency Fire Response
A Guilford call gets a crew inside the hour and a different first move when the structure is antique: protect original fabric, then board, tarp, extract, and light the site off our own generators.
IICRC S700 · 60 minute dispatch · Crown Street HQ
Fire Damage Guilford60-Min ResponseIICRC S700
Soda Blasting Soot Removal
Sodium bicarbonate abrasive blasting strips fire char from joists, sheathing, and masonry chimneys without damaging the substrate underneath. Mohs 2.5 media is softer than wood, FDA GRAS, silica-free, and water-soluble for HEPA-vac cleanup that wire brushing and sanding cannot match.
Sodium bicarbonate · Mohs 2.5 · IICRC S700 aligned
Soda BlastingChar RemovalIICRC S700
Smoke Damage Cleanup For Guilford Properties
Smoke damage in Guilford requires HVAC decontamination, negative-air containment, and HEPA scrubbing on every affected zone. We coordinate with property managers, condo boards, and adjusters so containment, scope, and access stay aligned across the entire affected footprint.
HVAC decon · Negative-air containment
Smoke CleanupHVAC DeconHEPA Scrubbing
5.0★Google Rating
60 minCrown Street Dispatch
2,200+Insurance-Documented Jobs
15+Years Experience
Additional Fire Restoration Services In Guilford
Emergency Board-Up And Tarp-Over
Same-day plywood board-up of broken windows and doors plus roof tarp-over to secure your Guilford property against weather, animals, and theft while the IICRC S700 restoration scope is finalized.
Board-Up GuilfordEmergency TarpSame-Day Secure
Emergency Generator Power And Site Electric
Whole-home and commercial generators staged on every Guilford fire response when utility power is cut at the meter. We run dehumidifiers, HEPA scrubbers, hydroxyl generators, and temporary lighting off our own diesel and propane gensets so drying, containment, and crew safety continue around the clock without waiting on Eversource to re-energize the service.
Generator PowerSite ElectricEversource Coordination
Oil Furnace Puff Back Cleanup
Full IICRC S700 puff back remediation for Guilford homes with oil-fired heat. Mechanical room cleanup, NADCA-aligned supply duct rotary brushing, soft-goods laundering, hydroxyl deodorization through every upstairs bedroom, and coordination with licensed CT oil burner technicians so the furnace returns to safe operation before close-out.
Furnace Puff BackOil HeatNADCA Duct Cleaning
Chimney Puff Back And Flue Soot Cleanup
Creosote-bonded soot blowback from clogged chimneys, downdrafts, and flue fires cleaned with soda blasting on the masonry, full firebox and damper service, and HVAC riser decontamination where the flue shares a chase with supply ducts. We coordinate with a licensed CT chimney sweep on flue liner inspection before reuse.
Chimney Puff BackFlue FireCreosote Removal
Kitchen Fire And Range Hood Restoration
Grease fire cleanup for Guilford kitchens including cabinet refinishing, appliance cleaning, soda blasting on charred framing behind drywall, and full structural restoration.
Kitchen FireGrease FireRange Hood Fire
Contents Pack-Out, Secure Storage And Soft-Goods Restoration
Inventoried, barcoded contents pack-out to our secure climate-controlled storage facility for off-site ultrasonic cleaning, ozone deodorization, and soft-goods laundering. Your Guilford belongings stay in humidity-controlled storage, documented for your insurer, until reconstruction is complete and we pack them back.
Pack-Out GuilfordSecure StorageSoft-Goods
Suppression Water Mitigation
IICRC S500 structural drying for fire suppression water. LGR commercial dehumidifiers, moisture mapping, and EPA-registered antimicrobial treatment within the 48-hour mold-prevention window so the fire loss does not become a mold loss on top of it.
Water CleanupStructural DryingIICRC S500
Molecular Odor Treatment
Thermal fogging, ozone chamber treatment, and hydroxyl generators neutralize smoke odor at the molecular level throughout the structure. The pH-neutralizing chemistry of our soda blast media also breaks down acidic soot odor compounds at the source, not just behind a fragrance mask.
Odor RemovalHydroxyl TreatThermal Fogging
Reconstruction And Permitted Repair
Single-source reconstruction once mitigation is signed off. Licensed CT contractors handle framing, drywall, electrical re-feed off our gensets, plumbing, hardwood refinishing, and finish carpentry through the Guilford building department permit process. One restoration partner from board-up and generator power through reconstruction handoff means no scope gaps between trades and one closeout file for your carrier.
ReconstructionRebuildLicensed CT
Guilford Fire Damage Does Not Wait For Morning. 60 Minute Response.
A certified crew reaches Guilford inside the hour and carries the loss through to reconstruction.
Why Choose Us In Guilford
Owner-led IICRC AMRT + WRT certified fire damage response with 60-minute from crown street, soda blasting soot removal, and direct insurance billing across Guilford and New Haven County and Connecticut shoreline.
IICRC AMRT + WRT Certified Owner
Our owner holds IICRC AMRT and WRT certifications and walks every Guilford fire job. The only New Haven County restoration company with an IICRC-certified owner-operator on every major loss.
2xIICRC certs personal
60-Minute From Crown Street To Guilford
IICRC S700 certified crews arrive within 45 to 60 minutes from 38 Crown Street New Haven with board-up materials, roof tarps, HEPA air scrubbers, blast pots, and water extraction equipment.
<60minutes on-site
In-House Soda Blasting Crew
Sodium bicarbonate char removal on structural framing, joists, sheathing, and masonry chimneys. The only New Haven County crew running soda blasting in-house for Guilford fire damage.
Mohs2.5 abrasive media
Direct Insurance Billing
We bill State Farm, Liberty Mutual, Travelers, Chubb, AIG, and every major carrier directly with IICRC documentation, soda blasting protocol records, AMRT clearance records, and contents inventory for Guilford claims.
100%carrier billing
Common Fire & Smoke Damage, Handled
The Fire & Smoke Damage We See Most in Guilford
These are the fire and smoke losses we restore most often, every job run to the IICRC S700 standard with documented cleaning, source odor control, and a record built for your insurer.
01/ 04
Kitchen Fire DamageGrease & Stovetop Fire
Kitchen Fire, Cleaned And Restored
Kitchen Fire Damage
Kitchen Fire, Cleaned And Restored
Local Note
In Guilford, a range hood grease fire in a Guilford Center colonial leaves heavy soot on cabinetry and counters.
The Situation
Most home fires start in the kitchen, where a grease or stovetop flare can scorch cabinets, melt fixtures, and drive greasy soot across the ceiling and into adjoining rooms. The residue is acidic, so it keeps etching metal, stone, and finishes for as long as it sits.
How We Restore It
Our IICRC S700 crews stabilize the scene, remove unsalvageable material, and clean structural surfaces with the right method for each soot type, dry sponge, solvent, or abrasive, before sealing odor-bearing surfaces. Contents are inventoried and either cleaned on site or packed out for off-site restoration.
Restored To Standard
Surfaces are cleaned to a documented standard and deodorized so the kitchen does not carry a lingering burnt odor. Every line of scope, photo, and cleaning record is documented for your insurer so the claim moves on evidence.
IICRC S700 ProtocolSoot-Specific CleaningDocumented For Insurer
1 / 4
Scenario 1 of 4: Kitchen Fire Damage
One Local Team
More Green Restoration Services in Guilford
The same local Green Restoration team covers all of these across Guilford. One number for every emergency and every cleanup.
Two Ways To Start
How would you like
to start?
Guilford Fire Cost Range
$3,500→$80,000
Common range across single-room smoke remediation through whole-home fire reconstruction. Final pricing depends on owner-led inspection.
Cost Estimator/01
Get A Price Range In 60 Seconds.
Four quick questions. Starting figures on this page. No call required.
Open The Estimator
Owner On-Site Walk/02
Walk The Loss With The Owner.
FLIR thermal scope. Free, no obligation. Owner-led on every fire job.
Book Free Inspection
Ranges shown are starting figures only. Final pricing depends on on-site inspection and carrier coverage. We are not licensed public adjusters.
Understanding The Risk
What Untreated Fire Damage Costs Your Guilford Home
In a 200-year-old Guilford colonial the finishes are the value: original wide-board floors, hand-planed trim, plaster on accordion lath. Acidic soot etches all of it within 72 hours, and aggressive cleanup destroys what the fire spared. The method matters as much as the speed.
Soot Etches Guilford Finishes In 72 Hours
Acidic Residue Attacks Stone And Metal Fast
Acidic soot starts etching glass, marble, brass, and stainless inside 72 hours, and in a Guilford colonial the etching hits irreplaceable surfaces: original hardware, hand-blown glass, period mantels. Waiting for the adjuster before cleanup starts converts salvageable history into a total loss.
Smoke Travels Through Guilford HVAC And Walls
Hidden Spread Beyond The Fire Room
A single-room fire on the Whitfield Street Guilford Green corridor or Long Hill pushes smoke through wall cavities, return-air plenums, and shared HVAC trunks within minutes. Without negative-air containment and HEPA scrubbing, adjacent rooms are contaminated by soot the original fire never reached.
Guilford Puff Back Hits Oil Heat Stock Hard
Pre-War Colonial, Whitfield House Historic Stock, Coastal Cape, Run Oil Burners
Plenty of older Guilford homes still heat on oil, and an ignition failure sends oily soot through every supply register in the house. The mechanical room, the duct runs, and the upper floors all need S700 remediation before that film bonds permanently to plaster and painted woodwork.
Suppression Water Causes Secondary Mold
Mold Colonizes In 48 Hours Unsealed
Suppression water in an antique structure finds the open post-and-beam bays and travels. Accordion lath and horsehair plaster hold that moisture far longer than drywall, so the 48-hour S500 drying window is tighter here than in modern stock. Miss it and mold starts a second claim inside the first one.
Chimney Puff Back Bonds Creosote To Masonry
Flue Downdraft Or Liner Failure
A clogged flue or liner failure sends a chimney puff back through the firebox and adjacent rooms. Creosote-bonded soot etches brick, fieldstone, and stone hearths within days. Without soda blasting on the masonry and a licensed CT sweep liner inspection, the next fire risks restart inside the chase wall, common in older Guilford stock along Long Hill ridge and Old Sachems.
No Utility Power Stalls Drying And Cleanup
Eversource Or UI Service Cut At The Meter
Guilford Fire Department often pulls the meter on a structural fire, and Eversource or United Illuminating re-energization runs days to weeks. Without site generators running dehumidifiers, HEPA scrubbers, and hydroxyl machines, drying and odor work stalls. Our trucks roll with diesel and propane gensets so work continues.
Local Expertise
Why Guilford Properties Need Professional Fire Restoration
Guilford pre-war Colonial, Whitfield House historic stock, coastal Cape, and post-war ranch along the Long Island Sound shoreline and Guilford Green Historic District each create fire patterns that DIY cleanup and surface-only methods cannot solve. IICRC S700 response with in-house soda blasting led by an IICRC-certified owner is the durable fix.
1
IICRC AMRT + WRT Certified Owner On Every Job
Our owner holds personal IICRC certifications in Applied Microbial Remediation (AMRT) and Water Restoration (WRT). The only New Haven County restoration company where the owner walks every fire job and signs the IICRC documentation that goes to your adjuster.
2
60-Minute Response From Crown Street To Guilford
A crew is on site in Guilford within 45 to 60 minutes of your call, day or night, dispatched from 38 Crown Street New Haven. Same-visit board-up, tarp-over, and fire suppression water extraction begin immediately so the loss stops compounding while your adjuster is still being assigned.
3
In-House Soda Blasting Crew For Char Removal
Green Restoration runs Econoline blast pots, sodium bicarbonate media, and trained operators in-house, the only New Haven County restoration company with soda blasting capability on the truck for fire jobs. Guilford post-and-beam framing, antique joists, and masonry chimneys are all candidates for source-removal char cleanup that wire brushing cannot match.
4
Direct Billing With Every Major Carrier
We bill State Farm, Liberty Mutual, Travelers, Chubb, AIG, Safeco, and every other major carrier directly with IICRC documentation, timestamped photos, soda blasting protocol records, AMRT clearance records, and contents inventory so your Guilford claim closes fast.
Soda Blasting Soot Removal
How Soda Blasting Removes Fire Soot Without Damaging Surfaces
Soda blasting is the difference between a fire-cleaned Guilford property that stays clean and a property that smells like smoke six months later. Guilford post-and-beam framing and Guilford masonry absorb fire soot into the substrate itself, where sanding and wire brushing cannot reach without driving carbon deeper. Our IICRC S700 crews run sodium bicarbonate abrasive blasting in-house on every fire job that needs source removal on structural surfaces, with AMRT-led mold prevention running in parallel.
Media
Sodium Bicarbonate, Mohs 2.5
Pharmaceutical-grade baking soda. Softer than wood (Mohs 4) and original lath, harder than soot bond layer. Friable on impact, shatters into dust on contact with the substrate rather than embedding into grain or finish.
Standard
IICRC S700 + S520 Aligned
IICRC S700 fire protocol and S520 mold protocol both list abrasive blasting as a recognized source-removal method for porous structural wood, charred framing, joists, and sheathing where wire brushing leaves residue.
Safety
FDA GRAS, Silica-Free
Same compound used in food and pharmaceuticals. No crystalline silica, no toxic residue, no respirable lung hazard beyond standard PPE. Non-sparking and non-flammable on partially-cleared fire scenes.
Why Soda Blasting Beats Sanding And Wire Brushing
Nobody should ever take an abrasive wheel to a hand-hewn Guilford timber. That is the whole argument for soda: sodium bicarbonate sits at Mohs 2.5, below wood, plaster, and antique brick, so it removes the char layer and nothing else. Tool marks from the original builder survive the process. Wire brushing, by contrast, smears a carbon film into the grain that re-emerges as odor weeks later, and sanding erases irreplaceable surfaces entirely. On a historic structure the blast media is a preservation decision as much as a cleaning one, and the pH chemistry of the media kills the acidic soot smell at its source in the same pass.
Where We Use Soda Blasting In Guilford Fire Jobs
On a Guilford job the blast list reads like a preservation survey: hand-hewn posts and beams, antique roof sheathing, fieldstone and brick chimney masonry, and period mantels too far gone for sponge work. Bicarbonate handles each without cutting timber dimension or opening stone joints. Modern additions with standard framing get the same media at the same pressure; only the documentation changes, since original fabric gets photographed before and after every pass.
Residue Cleanup And Post-Blast Encapsulation
The residue story matters in a historic house: bicarbonate is water-soluble and FDA GRAS, so nothing abrasive or toxic stays in the wall cavities. HEPA vacuuming, a damp microfiber wipe, and an EPA-registered antimicrobial application under AMRT protocol close the blast scope. Framing moisture is verified below 16 percent before any cavity closes, and in old-growth timber we probe deep grain, not just surface, because antique wood holds water where meters read dry.
Soda Blasting Decision Tree
- • Charred wood framing, joists, sheathing: yes
- • Stone, brick, masonry chimneys with creosote or puff back: yes
- • Plaster walls with surface soot, no structural char: HEPA dry sponge, then test patch before soda blast
- • Drywall with deep smoke saturation: replace and prime new substrate; soda blast adjacent structural cavity
- • Soft goods, upholstery, electronics: pack-out for ozone and hydroxyl, never blasted
Fleet Equipped For Every Guilford Fire Job
One Crew, One Dispatch, Every Fire Scenario In Guilford, CT
A Guilford response has to be ready for a 1780 saltbox and a 1990 colonial on the same night. The fleet carries the full kit, blast pots through negative-air machines, so the crew commits to a staging plan only after seeing which century the structure comes from.
Onboard Equipment
Soda Blast Pots · HEPA Scrubbers · Hydroxyl Generators · Pack-Out Crates
Every Guilford response truck is staged with the full IICRC S700 fire kit, soda blasting setup, contents pack-out crates, and structural drying equipment so a single dispatch handles board-up through reconstruction handoff.
How We Adapt The Truck For Guilford
Crews come off I-95 or Route 1 into Guilford inside the hour. On historic structures the first staging move is protection, ram board and poly over original floors and stairs, before equipment rolls in. On modern platform-framed homes the extraction and drying plant goes straight to work. Owner walk-through on every major loss.
Same Crew, Different Fire Patterns
The Green district and the shoreline points hold the concentration of antique stock, and those calls run longer on documentation: every original surface gets photographed before treatment so the carrier file shows condition, method, and result. One S700 protocol, applied with a preservationist approach to the order of operations.
Common Guilford Fire Patterns We Handle
Dispatch The Crew · (833) 833-3637- •Sachem's head and mulberry point shoreline waterfront cottage cooking fires
- •Whitfield street historic colonial oil burner puff back
- •Boston street commercial restaurant kitchen grease
- •Long Hill ridge estate kitchen fires in entertainment-grade ranges
- •Long Island Sound and East River corridor outbuilding and shed fires
- •Guilford antique stock chimney and flue puff back
Our Process
Our Fire And Smoke Damage Restoration Process In Guilford, CT
From the first call to final walkthrough, every step is documented, insured, and owner-supervised.
01Current Step
6 StepsStart to Finish
100%Owner-Supervised
DirectInsurance Billing
Service Area
Fire Damage Coverage In Guilford, CT
Full service fire damage response, soda blasting soot cleanup, contents pack-out, and reconstruction for Guilford homes and businesses. 60-minute emergency dispatch across New Haven County, day or night.
Neighborhoods We Serve In Guilford
Guilford CenterSachem's HeadMulberry PointMadison borderLong HillBoston StreetWhitfield StreetOld SachemsNut PlainsLeetes Island
Green Restoration provides IICRC S700 certified fire damage restoration and soda blasting soot removal in Guilford, CT, serving neighborhoods including Guilford Center, Sachem's Head, Mulberry Point, Madison border, Long Hill, and Boston Street. Dispatched from 38 Crown Street New Haven with direct access via I-95, I-91, and the Wilbur Cross Parkway, our certified technicians are on site within 45 to 60 minutes of dispatch with board-up, tarp-over, soda blast pots, and contents protection.
As a locally based Green Restoration franchise, we know the fire conditions Guilford properties face along the Long Island Sound shoreline and Guilford Green Historic District: Sachem's Head and Mulberry Point shoreline waterfront cottage cooking fires, Whitfield Street historic Colonial oil burner puff back, and Boston Street commercial restaurant kitchen grease. The owner personally walks every major loss and coordinates directly with adjusters from State Farm, Travelers, Liberty Mutual, Chubb, and all other major carriers.
We are not licensed public adjusters and do not negotiate claims on your behalf. We submit IICRC S700 scope documentation directly to your insurer.
Other Restoration Services In Guilford
Active Fire Emergency In Guilford?
60-minute emergency dispatch, 24/7/365.
(833) 833-3637Request Free InspectionIICRC S700 · Licensed & Insured · All Insurance Accepted
Serving Guilford (06437) & Nearby Towns
Cheshire, CTCromwell, CTDurham, CTKillingworth, CTMadison, CTMeriden, CTMiddlefield, CTMiddletown, CTNorth Haven, CTWallingford, CT
All New Haven Office service area towns served from 38 Crown Street, New Haven CT.
Hours Of Operation
24/7 Emergency ResponseCall Anytime, Day Or NightFire, Smoke, Water Damage, Mold, Storms, And Sewage Emergencies Dispatched Immediately
Scheduled AppointmentsMonday Through Friday, 8:00 AM, 4:00 PMNon-Emergency Inspections, Contents Assessments, & Reconstruction Consultations
Fire Emergency Response
24/7 Fire Damage Response In Guilford, CT
Crews dispatched within 45 to 60 minutes across Guilford and New Haven County and Connecticut shoreline. Board-up, soda blasting source removal, contents pack-out, and reconstruction managed end to end by our IICRC AMRT + WRT certified crew.
45-60 MinCrown Street Dispatch
Crews on site within 45 to 60 minutes from 38 Crown Street New Haven with board-up, HEPA scrubbers, blast pots, and generator power for Guilford.
AMRT+WRTIICRC Certified Owner
Our owner personally holds IICRC AMRT (mold) and WRT (water) certifications and walks every Guilford fire job.
Major CarriersState Farm · Travelers · Liberty Mutual
We file scope documentation and itemized estimates directly with major carriers. Not licensed public adjusters.
Soda BlastingIn-House Equipment
Econoline blast pots and sodium bicarbonate media run by trained operators on every fire job that needs source removal.
About Green Restoration
About Green Restoration In Guilford, CT
Your Guilford Fire & Smoke Damage Specialists Since 2014
Green Restoration provides IICRC S700 certified fire and smoke damage restoration, soda blasting soot cleanup, contents pack-out, and reconstruction for homes and businesses in Guilford, CT. Our process focuses on rapid stabilization, hospital-grade soot removal, molecular odor treatment, and documented reconstruction. We work with property owners and insurance providers to document scope clearly and restore affected areas the right way, without unnecessary steps or delays.
David MegeneishviliLocal Owner, New Haven County, CT
15+ Years ExperienceHIC.0668405
“As the local co-owner from 38 Crown Street New Haven, I am IICRC certified in water restoration (WRT) and mold remediation (AMRT). Every Guilford fire job is personally overseen, documented for your insurer, and stays open through soda blasting clean-up and reconstruction until lab-verified clearance confirms the work is complete.”
IICRC Certified FirmLicensed & Insured In CTBBB A+ Rated Business
How CT Claims Work
How carrier claims work with you.
Connecticut policyholders generally have the ability to select their own licensed restoration contractor. Carriers and contractors work the same claim process together.
02RIGHT
Referrals are a convenience.
Carrier referral and preferred-vendor programs are offered to streamline claims. You can use a referred contractor or retain a different licensed contractor.
03RIGHT
Direct billing works either way.
Referred or independent, we submit IICRC S700 documentation, photo-logged inventory, and itemized line items directly to your adjuster.
04RIGHT
You can change crews mid-job.
If you bring in a different licensed contractor mid-project, the scope and remaining work are documented at handoff so the claim continues without gaps.
Educational reference only. We are not licensed public adjusters and do not negotiate claims on your behalf. Coverage and process specifics live with your carrier and your policy language.
Local Success Stories
Trusted by Families in Guilford &
New Haven County
4.8 out of 5, Rated by your neighbors on Google
We discovered mold when removing our pellet stove and called Green Restoration for help. David was very communicative and helpful throughout the entire process. He did the job thoroughly and professionally. Highly recommended!
DW
David Woolner
Mold RemediationVerified • October 2025
I had a fantastic experience with Green Restoration. From start to finish, the team was professional, thorough, and extremely knowledgeable. David came for the initial inspection and took the time to explain the entire process.
AG
Annmarie Gieparda
Mold RemediationVerified • March 2025
We had mold due to a water leak in our half finished basement. David and his crew did a great job, we were very satisfied. I would highly recommend Green Restoration to anyone.
T
Tanya
Water DamageVerified • February 2025
I needed my entire condo completely cleaned after a soot blow back. Green Restoration was top shelf! So thorough and professional. Thank you so much!
JH
Jacki Hornish
Fire & Soot CleanupVerified • September 2025
Fire Damage Pricing
How Much Does Fire Damage Restoration Cost In Guilford, CT?
Instant estimate for emergency response, soda blasting soot cleanup, contents pack-out, and reconstruction in Guilford and New Haven County and Connecticut shoreline. Owner-led inspection on scope above $25,000. Transparent pricing, direct insurance billing.
Ranges based on IICRC S700 fire jobs we have handled across New Haven County, drawn from 10 verified Google reviews (5.0★) and our internal job-cost ledger. Final pricing depends on on-site inspection.
Most Common
Smoke, Soot & Puffback
$1,500 to $8,500
Furnace puffback, chimney smoke, soot or nicotine odor cleanup, no structural burn
Contained Fire + Smoke
$8,500 to $45,000
Single-area burn with house-wide smoke, soot and suppression water cleanup
Major Structural
$45,000 to $150,000+
Multi-room structural loss with demolition, odor sealing and full reconstruction
Priced by scope: what burned, and how far the smoke traveled. Read the full cost guide.
Expert Answers
Guilford Fire And Smoke Damage FAQs
Clear, honest answers about emergency fire response, soda blasting, IICRC certifications, and insurance coverage in Guilford, CT.
Smoke, soot, and puffback cleanup with no structural burn typically runs $1,500 to $8,500, and it is the most common fire-family job we handle in Guilford. A contained fire with house-wide smoke damage runs $8,500 to $45,000, and major structural restoration with reconstruction runs $45,000 to $150,000 and up. Smoke travel, soot type, and suppression water place a loss inside its tier. Assessment is free and produces a written line-item scope we submit directly to your insurer. We are not licensed public adjusters and do not negotiate claims on your behalf.
Coming off I-95 or Route 1 from 38 Crown Street in New Haven, a certified S700 crew reaches most of Guilford in 45 to 60 minutes at any hour. For a major loss the owner attends the first walk personally. The line is (833) 833-3637 and it answers around the clock.
Soda blasting uses sodium bicarbonate at Mohs 2.5, softer than wood, plaster, or original lath, so the abrasive shatters into water-soluble dust on impact instead of embedding into the substrate. Guilford is why we insist on it: you do not take a wire wheel to hand-hewn post-and-beam timber or original lath. Sodium bicarbonate at Mohs 2.5 is softer than any of those surfaces, shatters on impact, and carries the char away as water-soluble dust, deodorizing the acidic soot chemically as it goes. The timber keeps its tool marks.
A contained single-room smoke loss in Guilford starts near $3,500. Historic-home losses climb toward $80,000 or more once timber-safe soda blasting, duct decontamination, pack-out, and period-appropriate reconstruction enter the scope. Ranges based on jobs we have handled across New Haven County and Connecticut shoreline. We provide a written IICRC S700 scope estimate on-site after thermal imaging and soot density mapping, with the owner present for any scope above $25,000.
Fire is a covered peril at replacement cost on Connecticut homeowner policies, and for antique homes the documentation is where claims are won: we photograph original fabric before treatment, log method choices, and submit S700 records and contents inventory directly to the carrier. We are not licensed public adjusters and do not negotiate claims on your behalf; we make sure the adjuster sees exactly what the house was and what it took to bring it back.
Our owner is personally IICRC certified in two disciplines that directly apply to Guilford fire restoration: WRT (Water Restoration Technician for suppression water mitigation) and AMRT (Applied Microbial Remediation Technician for secondary mold after suppression water). Green Restoration is also an IICRC Certified Firm. CT HIC.0668405 issued under the company.
In Guilford the age of the structure sets the clock as much as the fire does. A contained kitchen fire: 5 to 10 days. Smoke through original plaster walls or a puff back: 10 to 21 days. A whole-home historic restoration with timber-safe soda blasting, period reconstruction, and Guilford building department permits: 30 to 90 days.
Yes, both scopes. Guilford chimney puff back is the one we see most, given how many working fireplaces and woodstoves the older colonials keep: soda blasting on the masonry, firebox and damper service, a licensed CT sweep on the flue liner, and decontamination of any riser sharing the chase. Oil furnace puff back is its own scope: mechanical room decontamination, NADCA-aligned duct cleaning, soft-goods laundering, hydroxyl deodorization, and a licensed oil burner technician clearing the unit for reuse. Both finish with full IICRC S700 documentation.
Guilford fire crews pull the meter on structural fires and the utility takes what it takes. We bring our own power: diesel and propane gensets on the trucks run the dehumidifiers, HEPA scrubbers, and hydroxyl machines continuously. In a historic home this is not optional, because every extra day of trapped moisture in old-growth framing and plaster is damage the fire itself never did.
Historic Guilford homes deserve a restorer who knows what not to destroy. We pair an IICRC WRT + AMRT certified owner-operator with timber-safe in-house soda blasting no other New Haven County crew offers, S700 documentation your adjuster can approve on first read, and reconstruction that respects period detail. HEPA scrubbers, hydroxyl generators, pack-out trucks, and blast pots roll on every call. (833) 833-3637, any hour.
Yes, and in a Guilford antique home the contents ARE the story: period furniture, art, and textiles are barcoded, photographed, and moved to climate-controlled storage, with conservation-minded cleaning and deodorizing off-site. We flag pieces that warrant a conservator rather than pretending soot removal on an oil painting is routine. Documented end to end for the insurer, packed back when the rebuild signs off. Call (833) 833-3637.
